COURSES  -  ELECTRICAL ENGINEERING

 

Ethics - Electrical Engineering
Professional Ethics for Engineers
The American Council of Engineering Companies Ethics Guidelines
Institute of Electrical and Electronics Engineers Code of Ethics
Professional Ethics for Electrical Engineers Using the Fundamentals Canons of Engineering Practice
Professional Ethics for Control Systems Engineers Using the Fundamentals Canons of Engineering Practice
Studies Using the NSPE Code of Ethics
Ethics Using the Rules of Practice
Electrical Impedance Spectra to Monitor Damage During Tensile Loading of Cement Composites
An Approach for Measuring Reductions in Operations, Maintenance, and Energy Costs in Educational Facilities
Introduction to Fast Ethernet
Electromagnetic Propagation in Low Coal Mine at Medium Frequencies
Early Detection of Insulation Failure in Electric Motors
Polycrystalline Thin-Film Cadmium Telluride Solar Cells Fabricated by Electrode Position
Optimizing the Level of Renewable Electric R & D Expenditures Using Real Options Analysis
What Will It Take to Reach Solar Photovoltaic's Ultimate Potential
The Importance of Basic Science in Addressing the Challenges of Organic Photovoltaics
Facilitating Wind Development: The Importance of Electric Industry Structure
Examination of Capacity and Ramping Impacts of Wind energy on Power Systems
Photovoltaic Incentive Design Handbook
Interaction of Radio Transmissions on Mine Monitoring and Control Systems
Photovoltaic Array Performance Model
Propagation of EM Signal in Underground Mines
Photovoltaic Manufacturing Technology Monolithic Amorphous Silicon Modules on Continuous Polymer Substrates
Protection of Data Processing Equipment with Find Water Sprays
Introduction to Industrial Networking
Influence of Electrode Material on Spark Ignition Probability
Evaluation of a Signaling and Warning System for Underground Mines
Hubs Versus Switches -- Understand the Tradeoffs
Wireless Communications for Trackless Haulage Vehicles
Vertical Magnetic Noise in the Voice Frequency Band Within and Above Coal Mines
Introduction to the Transmission Control Protocol
Glossary of Industrial Ethernet Terms
Rooftop Photovoltaics market Penetration Scenarios
Power System Planning: Emerging Practices Suitable for Evaluating the Impact of High-Penetration Photovoltaics
Stability Issues of Transparent Conducting Oxides for Thin-Film Photovoltaics
The Potential of Photovoltaics
Production Cost Modeling for High Levels of Photovoltaics Penetration
Transmission System Performance for High-Penetration Photovoltaics
Photovoltaic Value Analysis
Characterization of the Electronic and Chemical Structure at the Thin Film Solar Cell Interfaces
Novel Capacitance Measurements in Copper Indium Gallium Diselenide Alloys
An Approach for Measuring Reductions in Operations, Maintenance, and Energy Costs
Powering Industrial Ethernet Equipment
Instrumentation for Concrete Structures
Power Over Ethernet -- Industrial Ethernet is Now a True Fieldbus
Choosing the Right Industrial Ethernet Switch
Survey of Ethernet Redundancy Methods
Introduction to Switch Technology
Incorporating Media Converters
Understanding EIA-485 Networks
Introduction to Modbus Protocol
Introduction to Spanning Tree Protocol
Introduction to Subnetting
Introduction to Control
Thermal Modeling of Portable Power Cables
Introduction to Simple Network Management Protocol 
Implementation of a Control Project
Introduction to Virtual LANS
Multi-Segment Ethernet Networks
Introduction to ARCNET
High-Efficiency Triple-Junction Amorphous Silicon Alloy Photovoltaic Technology
Post-Lamination Manufacturing Process Automation for Photovoltaic Modules
Validation Testing of Procedures for Determining the Performance of Stand-Along Photovoltaic Systems
Properties of Wide-Gap Chalcopyrite Semiconductors for Photovoltaic Applications
Water Supply and Fire Protection
Cathodic Protection Anode Selection
Electrical Transmission and Distribution Safety Manual
Hydroelectric Power Plants Electrical Design
Photovoltaic Power Systems and the National Electrical Code: Suggested Practices
Instrumentation of Embankment Dams and Levees
Cathodic Protection Systems for Civil Works Structures
Electrical Design - Lightning and Static Electricity Protection
Operation, Maintenance and Repair of Auxiliary Generators
Power Transformer Maintenance and Acceptance Testing
Mechanical and Electrical Design of Pumping Stations
Safety and Health Requirements Manual
Facilities Engineering -- Electrical Facilities
OSHA General Safety and Health Provisions
OSHA Standards for Fire Protection
OSHA Standards -- Electric Codes
Post-Lamination Manufacturing Process Automation for Photovoltaic Modules
Validation Testing of Procedures for Determining the Performance of Stand-along Photovoltaic Systems
Improved Radiometric Calibrations and Measurements for Evaluating Photovoltaic Devices
Photovoltaic Manufacturing Technology Monolithic Amorphous Silicon Modules on Continuous Polymer Substrates
Properties of Wide-Gap Chalcopyrite Semiconductors for Photovoltaic Applications
Utility-Interconnected Photovoltaic Systems: Evaluating the Rationale for the Utility-Accessible External Disconnect Switch
Development of Robust High Efficiency Thin-Film Cadmium Telluride Photovoltaic Modules
Enhanced Reliability of Photovoltaic Systems with Energy Storage and Controls
High Penetration of Photovoltaic Systems into the Distribution Grid
Design, Installation, and Utilization of Fixed-Fenceline Sample Collection and Monitoring Systems
Controlling Electrical Hazards
Wireless Internet Protocol -- Internet Without Wires
Introduction to the 2005 National Electrical Code
Electrical Services and Conductors According to the 2005 National Electrical Code
Overcurrent Protection According to the 2005 National Electrical Code
Grounding and Bonding According to the 2005 National Electrical Code
Wiring Methods According to the 2005 National Electrical Code
Luminaires, Lampholders and Lamps According to the 2005 National Electrical Code
Appliances According to the 2005 National Electrical Code
Fixed Electric Space-Heating Equipment According to the 2005 National Electrical Code
Motors, Motor Circuits, and Controllers According to the 2005 National Electrical Code
Air-Conditioning and Refrigerating Equipment Installations According to the 2005 National Electrical Code
Health Care Facility Electrical Installations According to the 2005 National Electrical Code
Mobile Homes, Manufactured Homes, and Mobile Home Parks According to the 2005 National Electrical Code
Recreational Vehicles and Recreational Vehicle Parks According to the 2005 National Electrical Code
Park Trailers Electrical Installation According to the 2005 National Electrical Code
Electric Signs and Outline Lighting According to the 2005 National Electrical Code
Cranes and Hoists According to the 2005 National Electrical Code
Elevators, Dumbwaiters, and Escalators, Etc. According to the 2005 National Electrical Code
Swimming Pools, Fountains, and Similar Installations According to the 2005 National Electrical Code
Solar Photovoltaic Systems According to the 2005 National Electrical Code
Fire Pumps According to the 2005 National Electrical Code
Emergency Systems According to the 2005 National Electrical Code
Fire Alarm Systems According to the 2005 National Electrical Code
Communication Circuits According to the 2005 National Electrical Code
Network-Powered Broadband Communication Systems According to the 2005 National Electrical Code
Ground-fault Protection on Construction Sites
Using Ethernet with Fiber Optic Cabling
Interconnection for Testing Distributed Resources
Using Trunking to Increase Backbone Performance 
Opportunities and Challenges for Development of a Mature Concentrating Photovoltaic Power Industry
Improved Radiometric Calibrations and Measurements for Evaluating Photovoltaic Devices
Capacitance Cell Measurement of the Out-of-Plane Expansion
Using Ethereal for Network Troubleshoot
Identifying Electronic Properties Relevant to Improving the Performance & Stability of Amorphous Silicon Based Photovoltaic Cells