COURSES - MECHANICAL ENGINEERING
Ethics - Case study of a TV Antenna Tower Collapse
Ethics - Mechanical Engineering
Professional Ethics for Mechanical Engineers Using the Fundamental Canons of Engineering Practice
Professional Ethics for Engineers
The American Council of Engineering Companies Ethics Guidelines
Ethics Using the Rules of Practice
Case Studies Using the NSPE Code of Ethics
Apparatus for Measuring Diesel Tailpipe Emissions in Underground Mines
Effectiveness of Iron-Based Fuel Additives for Diesel Soot Control
Determination of Elastic Twist in Horizontal Axis Wind Turbines
Energy From Offshore Wind
Direct Imaging of Current Driven Walls in Ferromagnetic Nanostripes
Spin Transfer Torque and Dynamics
Characterization of a Residential Fire Sprinkler Using Phase Doppler Interferometry
Characterization of Candle Flames
Characterization of the Confined Ceiling Jet in the Presence of an Upper Layer in Transient and Steady-State Conditions
Characterizing Positive Pressure Ventilation Using Computational Fluid Dynamics
Compartment Fire-Generated Environment and Smoke Filling
Combustion of Oil on Water
Effect of an Obstructed Ceiling on the Activation Time of a Residential Sprinkler
Economic Analysis of Residential Fire Sprinkler Systems
Investigation of the Impact of Commercial Building Envelope Airtightness Freon HVAC Energy Use
Use of Fluorescence to Measure for Lubricant Excess Surface Density During Pool Boiling
Combustion of a Polymer Sphere in Microgravity
Combined Buoyance- and Pressure-Driven
Flow Through a Horizontal Vent
Development of a Measurement Facility for Evaluating Thermal Imagers for Fire Fighter Applications
Development of a Hazard-Based Method for Evaluating the Fire Safety of Passenger Trains
Design Parameters for Stack-Mounted Light Extinction Measurement Devices
Design of Smoke Control Systems for Areas of Refuge
Design of Smoke Control Systems for Elevator Fire Evacuation Including Wind Effects
Degradation of Powder Epoxy Coated Panels Immersed in a Saturated Calcium Hydroxide Solution Containing Sodium Chloride
Fire Hazards and Mitigation Measures Associated with Seismic Damage of Water Heaters
Development of a Method for Measuring Water-Stripping Resistance of Asphalt and Siliceous Aggregate Mixtures
Development of a Molecular Dynamics Model of Thermal Reactivity in Polymers
Development of an Economical Video Based Fire Detection and Location System
Development of Procedure to Enhance the Performance of Rehabilitate URM Buildings
Fire-Hazard and Fire-Risk Assessment of Fire-Retardant Polymers
Transient Modeling of Thermal Degradation in Non-charring Solids
Particle Size Analysis by Laser Diffraction Spectrometry: Application to Cementitious Powers
Passive Energy Dissipation Devices for Seismic Applications
Performance of a Commercial Hot Water Boiler
Fluid Dynamics of Agent Discharge
Global Kinetic Constants for Thermal Oxidative Degradation of a Cellulosic Paper
Mechanical Properties of High-Strength Concrete at Elevated Temperatures
Heterogeneous Combustion
A Hierarchical Rule-Based Fault Detection and Diagnostic Method for HVAC Systems
Gasification of Silicone Fluids Under External Thermal Radiation
Development of a Test Method for Leaching of Lead from Lead-Based Paints Through Encapsulants
Fire Hazard Comparison of Fire-Retarded and Non-Fire-Retarded Products
Effect of Beamed, Sloped, and Sloped Beamed Ceilings on the Activation Time of a Residential Sprinkler
Effect of Positive Pressure Ventilation on a Room Fire
The Effect of Recessed Sprinkler Installation on Sprinkler Activation Time and Prediction
Improvement in Predicting Smoke Movement in Compartmented Structures
Effect of Selected Variables on the Distribution of Water From Automatic Sprinklers
The Effect of Short Cycling and Fan Delay on the Efficiency of a Modified Residential Heat Pump
Characteristic of Pool Fire Burning
CFD Modeling Options for Total Flooding Behavior of Ultra Fine Water Mist
Thermal Spraying: New Construction and Maintenance
Measurement Issues in Single-Wall Carbon Nanotubes
Mapping Mechanical Properties on the Nanoscale with Atomic Force Acoustic Microscopy
Quantifying Anisotropic Elastic Material Properties of Biological Tissue Using Membrane Inflation
Gel Sealants for the Mitigation of Spontaneous Heatings in Coal Mines
Thermal Modeling of Portable Power Cables
Causes of the Apparent Heat Transfer Degradation for Refrigerant Mixtures
Carbon Monoxide Levels in Structure Fires
Carbon Monoxide Dispersion in Residential Buildings
Particle Formation in Laminar Flames Inhibited by Metals
Char Enhancing Approaches to Flame Retarding Polymers
Kinetic and Modeling Investigation on Dilute Sulfuric Acid and Hot Water Fractionation of Selected Biomass Plan
Inhibition of Premixed Methane Flames by Manganese and Tin Compounds
Estimating Reduced Fire Risk Resulting From an Improved Mattress Flammability Standard
Performance Evaluation of Electromagnetic Techniques for the Location of Trapped Mines
Analysis of Needs and Existing Capabilities for Full-Scale Fire Resistance Testing
A Numerical Model for Combustion of Bubbling Thermoplastic Materials in Microgravity
Flammability Characteristic of Painted Blocks
Opposed-Flow Flame Spread Over Polymeric Materials: Influence of Phase Chase
Effective Non-Toxic Metallic Fire Suppressants
Calculating Flame Spread on Horizontal and Vertical Surfaces
Cable Response to Live Fire: Thermally-Induced Electrical Failure Model
Burning, Smoke Production, and Smoke Dispersion From Oil Spill Combustion
A Burning Rate Model for Charring Materials
Burning Behavior of Selected Automotive Parts from a Sports Coupe
Burning Behavior of Selected Automotive Parts from a Minivan
Boiling with Refrigerants and Nanolubricants
Buoyancy Driven Flow as the Forcing Function of Smoke Transport Models
Uncertainty
Potential Benefits of Smart Refrigerant Distributors
Review of Residential Sprinkler Systems: Research and Standards
The Use of Nomenclature in Dispersion Science and Technology
Macrospin Models of Spin Transfer Dynamics
Magnetic Depth Profiling Cobalt and Copper Multi-Layers to Investigate Magnetoresistance
Benefit-Cost Analysis of Residential Fire Sprinkler Systems
Community-Scale Fire Spread
Acoustic Emission of Structural Materials Exposed to Open Flames
A Routine for Estimating the Initial Wave Front Resulting from High Temperature Fire Exposure to a Corridor
Characteristics of Wind Turbines Under Normal and Fault Conditions
Engineering Challenges for Floating Offshore Wind Turbines
Organometallic Polymer Coatings for Geothermal-Fluid-Sprayed Air-Cooled Condensers
Assessment of Evaporative Cooling Enhancement Methods for Air-Cooled Geothermal Power Plants
Improving Wind Turbine Gearbox Reliability
The Wind Farm Aggregation Impact on Power Quality
Engineering for Prefabricated Construction of Navigation Projects
Vertical Lift Gates
Design of Spillway Tainter Gates
Smart Sensor System for Structural Condition Monitoring of Wind Turbines
The International Plumbing Code: A Guide for Use and Adoption
Best Practices of the Safe Use of Glutaralhyde in Health Care
A Guide for Protecting Workers from Woodworking Hazards
Implicitly Coupling Heat Conduction into a Zone Fire Model
Radiation and Protection Manual
Effect of Usage Conditions on Household Refrigerator-Freezer and Freezer Energy Consumption
Installing, Maintaining, and Verifying Your Charpy Impact Machine
Effect of Wall & Room Surfaces on the Rates of Heat, Smoke, and Carbon Monoxide Production in a Park Lodging Bedroom Fire
Rockwell Hardness Measurements of Metallic Materials
Elastomer Seal Compatibility
Particle Size Characterization
Entrainment in Flame Geometry of Fire Plumes
Comparative Analysis of Alternative Means for Removing Non-Condensable Gases from Flashed-Steam Geothermal Power Plants
Emergency Elevator Evacuation Systems
Plumbing Systems
Refrigeration Systems for Cold Storage
Mechanical and Electrical Design of Pumping Stations
Wire Rope Selection Criteria for Gate-Operating Devices
Hydroelectric Power Plants Mechanical Design
High Temperature Water Heating Systems
Properties & Cycle Performance of Refrigeration Blends Operating Near & Above the Refrigerant Critical Point
Spray Characteristics of Fire Sprinklers
Holographic Dielectric Gratings: Theory and Practice
The Performance of Pile Driving Systems
Corrosion & Degradation of Soil Reinforcements for Mechanically Stabilized Earth Walls & Reinforced Soil Slopes
Nanofabrication Via Atom Optics
Finite Element CFD Analysis of Super-Maneuvering and Spinning Structures
Improved System Identification for Aeroservoelastic Predictions
Data Evaluation Theory and Practice for Materials Properties
On the Transpiration Method for Efficient Aeroelastic Analysis Using an Euler Solver
An Efficient Method for Time-Marching Supersonic Flutter Predictions Using CFD
Top-Fuel Dragster Wing Design Using CFD and Its Influence on Vehicle Performance
Introduction to Central Boiler Plants
Types of Central Boiler Plant Equipment
Development of a Measurement Facility for Evaluating Thermal Imagers for Fire Fighter Applications
Dispersed Liquid Agent Fire Suppression Screen Apparatus
Diesel Adsorption to PVC and Iron During Contaminated Water Flow and Flushing Tests
Development of the Fire Data Management System
Operation of Central Boiler Plants
Water Treatment for Boiler Plants
Inspection and Preventive Maintenance of Central Boiler Plants
Catalytic Inhibition of Laminar Flames by Transition Metal Compounds
Residential Sprinkler System Design Handbook
Compressed Air
Industrial Robots and Robot System Safety
Allowable Stresses in Piles
Accelerating Computational Fluid Dynamics Based Aeroelastic Predictions Using System Identification
Accelerating Computational Fluid Dynamics Based Aeroelastic Predictions Using Distributed Processing
Indoor Air Quality Investigations
Loudness Testing and Rating Procedure
Airflow Test Procedure
Product Performance Certification Procedure Including Verification and Challenge
Ventilation Investigation
OSHA Guidelines for Noise Measurements
OSHA Guidelines for Laser Hazards
OSHA Guidelines for Pressure Vessels
Porosity and Specific Surface Area Measurements for Solid Materials
Critical Mass Pyrolysis Rates for Extinction in Fires Over Solid Materials
A Framework for Information Technology Integration in Process Plant and Related Industries
A General Routine for Analysis of Stack Effect
Guide for X-Ray Powder Diffraction Analysis of Portland Cement and Clinker
Heat and Moisture Transfer in Wood-based Wall Construction: Measured Versus Predicted
Mechanical Properties of High-Strength Concrete at Elevated Temperatures
Manual for Ventilation Assessment in Mechanically Ventilated Commercial Buildings
Horizontal Flow Boiling of Single Component and Binary Refrigerant Mixtures
Interlayer Exchange Coupling
Corrosion of Metals
Cone Calorimeter Evaluation of the Flammability of Composite Materials
Power Plant Acoustics
Lidar for Turbine Control
OSHA Guidelines for Legionnaires' Disease
The Formation of Whiskers on Electroplated Tin Containing Copper
General Principles of Pumping Station Design and Layout
Mold Remediation in Schools and Commercial Buildings
OSHA Guidelines for Respiratory Protection
OSHA Guidelines for Access to Exposure and Medical Records
Interactions of Agents with Elastomers and Lubricants
Intracycle Evaporative Cooling in a Vapor Compression Cycle
OSHA Guidelines for Lead in Construction
OSHA Guidelines for Methylene Chloride
Incorporation of Fly Ash into a 3-D Cement Hydration Microstructure Model
Intrinsic Viscosity and the Polarizability of Particles Having a Wide Range of Shapes
Optimization of Polymer Concrete Composites
Non-destructive Text Methods
OSHA Guidelines for Cadmium
Entrainment and Heat Flux of Buoyant Diffusion Flames
Evaporation and Condensation Heat Transfer Performance of Flammable Refrigerants in a Brazed Plate Heat Exchanger
Impact of a Residential Sprinkler on the Heat Release Rate of a Christmas Tree Fire
Buoyancy-Driven Ventilation of Hydrogen From Buildings: Laboratory Test and Model Validation
Flow Through Horizontal Vents as Related to Compartment Fire Environments
Modeling and Experimental Validation of Pyrotechnic Gas Generators
A Modeling Study of Ventilation in Manufactures Houses
Modeling the Effects of Outdoor Gasoline Power Generator Use on Indoor Carbon Monoxide Exposures
Modeling the Heat Release of Aircraft Cabin Panels
Multizone Modeling of Three Residential Indoor Air Quality Control Options
Nanocomposites: Radiative Gasification and Vinyl Polymer Flammability
A New Sequence Control Strategy of Air-Handling Units
Fluid Dynamics of Agent Discharge